Cast Aluminum Heating Rings for Injection Molding Machine

Cast Aluminum Heating Rings for Injection Molding Machine 1.Production Image 2.Simple Introduction Cast aluminum heating rings for injection molding machine is composed of injection molding machine and cast aluminum heating ring.Cast aluminum heating rings is casting heater with different...

Send Inquiry

Product Details

Cast Aluminum Heating  Rings for Injection Molding Machine

1.Production Image


image002.jpg

image004.jpg

2.Simple Introduction

Cast aluminum heating rings for injection  molding machine is composed of injection molding machine and cast aluminum  heating ring.Cast aluminum heating rings is casting heater with different  shapes,which is made by casting a tubular electrothermal heating element into  an aluminum solution.It is mainly used for plastic machinery, oven, boilers,  pipes and non-corrosive liquid heating up.

3.Cast aluminum heating ring use precautions

  1. The  operating voltage shall not exceed 10% of the rated value;

  2. Air  relative humidity of not more than 95%.No explosive and corrosive gases;

  3. Should be  done fixed positioning, effective heating area must be close with the heating  body.Air burning is strictly prohibited ;

  4. Electric  tube outlet of the magnesium oxide powder, in the use of places to avoid  contaminants and water infiltration, to prevent the occurrence of leakage  accidents;

  5. Should be  placed in a dry place, if long-term placement, insulation resistance below 1MΩ, can be about 200 degrees Celsius oven baking 5-6 hours, it can  return to normal. Or reduce the voltage through the heating, until the  restoration of insulation resistance;

(Cast aluminum electric heater products can  be customized according to customer requirements, such as providing drawings,  voltage, power, size)

4.Application industry

It can be widely used in plastic machinery,  die, mold, cable machinery, alloy die-casting machine, chemical, pipeline,  rubber, oil and other equipment.

Inquiry