Well Type Vacuum Cleaning Furnace

Well Type Vacuum Cleaning Furnace

W ell T ype V acuum C leaning F urnace 1.Production Image 2.Simple Introduction Our company's well type vacuum cleaning furnace is a new type of chemical cleaning equipment,It is widely used in polyester, polypropylene, nylon, spunbond non-woven fabrics, spinneret, spinning components and...

Send Inquiry

Product Details

Well Type Vacuum Cleaning Furnace

1.Production Image

image002.jpg 

2.Simple Introduction

Our company's well type vacuum cleaning furnace is a new type of chemical cleaning equipment,It is widely used in polyester, polypropylene, nylon, spunbond non-woven fabrics, spinneret, spinning components and filter cleaning.High polymer polymer can be completely oxidized in the environment at about 300 ℃ when the melt, higher than 300 ℃ isolated air crackable coking, higher than 400 ℃ in a small amount of air and a certain degree of vacuum.It will heat the sticky polymer dirt workpiece to 300 ℃ (according to process requirements),so that the workpiece on the larger number of polymer polymer melt flow to the bottom of the furnace after the collection container ,and then the furnace temperature rose to 400-500 ℃, while opening the vacuum pump and introducing a small amount of fresh air,so that the remaining polymer is fully oxidized and changed into carbon dioxide,after the water spray through the water ring vacuum pump suction, and water discharged from the furnace.

3.Cleaning Principle

image004.png 

4.Technical Parameters

Model

Furnace size 

(L xW x H))

Total power (KW) Heating / vacuum pump motor

Vacuum degree (MPa)

Set temperature
     (℃)

Temperature control accuracy(℃)

JZK - A

800X400x400

15/2.2

﹣0.075-0.08

600

±2

JZK - B

1000X600x600

24/3.0

﹣0.075-0.08

600

±2

JZK - C

1000X800x600

27/3.0

﹣0.075-0.08

600

±2

JZK - D

1200X800x600

32/4.0

﹣0.075-0.08

600

±2

Inquiry