Spinneret Cleaning Equipments

Spinneret Cleaning Equipment 1.Production Image 2.Simple Introduction Our company's vacuum calciner can be used for a variety of spinneret cleaning. 3.Precautions In order to further improve the cleaning effect and extend the use of spinneret cycle. The cleaned spinneret also follow-up...

Send Inquiry

Product Details

Spinneret Cleaning  Equipment

1.Production Image

image002.jpg

2.Simple Introduction

Our company's vacuum calciner can be used  for a variety of spinneret cleaning.

3.Precautions

In order to further improve the cleaning  effect and extend the use of spinneret cycle. The cleaned spinneret also  follow-up process(the follow-up process plants can be arranged according to the  specific circumstances),under normal circumstances,including the following  process:

  1. The  spinneret is placed in a hot water tank and washed for about 20 minutes;

  2. And then  put spinneret into the ultrasonic cleaning tank for cleaning, time 30 minutes  or so, the ultrasonic frequency of 25 ~ 40kHz;

  3. Then wash  the workpiece with water after be processed by ultrasonic,and then use  compressed air to dry the water particles attached to the board and the  pores.Finally, microscopic examination;

  4. When the  surface of the workpiece is not treated with silicone oil, it can be cleaned  using KOH solution with the concentration of 20% and the temperature of 60 ~ 70  ℃ for 2 hours before ultrasonic cleaning, and  then treated by oxalic acid and then subjected to ultrasonic treatment.

image003.jpg  

(Spinneret)

Inquiry